Lacrysil "AQUA BLOCK" Acrylic Waterproofing is a ready-to-use brush-on coating for creating a reliable waterproof barrier. It forms a super-elastic film, resistant to UV, frost, deformation, and weather conditions. Suitable for interior and exterior work requiring surface waterproofing (film-forming, not penetrating).

Recommended Applications:

• Roofs (rolled, cement-sand, reinforced concrete, flat and pitched)

• Foundations, plinths, basements (external and internal walls in contact with soil)

• Wet rooms (bathrooms, showers, kitchens, laundry rooms, toilets)

• Balconies, terraces, open areas

• Tanks, swimming pools, fountains (adjacent areas and basins without drinking water)

• Walls and floors in basements, garages, basement floors

• Protection against capillary moisture rise in brick, block, and concrete structures

• Waterproofing before laying tiles, screeds, insulation

• Repair and restoration of old waterproofing coatings

• Protection against atmospheric moisture on facades, parapets, cornices

Suitable for these surfaces:

• Concrete, reinforced concrete, brick

• Cement-sand screeds, plasters

• Aerated block, foam concrete, expanded clay concrete

• Metal (after priming with an anti-corrosion primer)

• Wood, chipboard, OSB (in areas without constant moisture)

• Old tiles, porcelain stoneware, rolled waterproofing (after cleaning)

• Mineral and porous substrates (after priming)

Not Recommended For:

• Joints with constant water pressure (e.g., inside a swimming pool basin under pressure — use special waterproofing compounds or membranes)

• Potable water or food-grade tanks

• Surfaces with heavy mechanical loads or constant friction without additional protection

• Areas with service temperatures above +80 °C or below -40 °C

• Bitumen or roofing felt coatings without prior compatibility testing

Important Recommendations Before Application:

• The surface must be clean, dry or slightly damp, free of dust, grease, old coatings, efflorescence, mold

• Remove all loose areas, clean with a wire brush or water jet

• It is recommended to prime with a deep-penetration acrylic primer (especially porous substrates)

• For better adhesion and reinforcement — reinforce with fiberglass mesh or non-woven fabric (between layers)

• Apply 2–3 coats (total thickness 1–2 mm) with an interval of 4–6 hours

• Do not apply during rain, at temperatures below +5 °C, or in high humidity

• Apply with a brush, roller, or spatula (for large areas — sprayer)

• Protect from rain and direct sunlight for the first 24 hours after application

• Full curing — 24–72 hours (depends on thickness, temperature, and humidity)

Typical Usage Examples:

• Brush-on waterproofing of foundations and plinths before backfilling with soil

• Waterproofing flat roofs before laying rolled material or tiles

• Protecting basements from capillary moisture from inside and outside

• Waterproofing balconies or terraces before tiling

• Sealing and waterproofing walls in bathrooms/showers before tiling

• Repairing leaks on roofs or in basements

• Protecting walls from moisture in basement garages

After complete drying and curing (7–14 days), the surface can be used, tiled, screeded, or insulated. The coating can be painted with acrylic facade paints.

Lacrysil "AQUA BLOCK" Acrylic Waterproofing — reliable, elastic, and durable protection against water. Ready to use, easy to apply, lasts for years!