Loading...
- Home
- Catalog
- Mounting glues
- Adhesive-sealant ...
- White, 0.4 kg
Adhesive-sealant - MS POLYMER UNIVERSAL , White, 0.4 kg
Strong adhesion from the first seconds + elasticity for movement joints
Can be applied on damp surfaces, high viscosity — no sagging on verticals
Wide temperature range and chemical resistance
Does not dissolve plastics (except PP/PE), safe for mirrors/glass
Universal: bonds + seals, economical, odorless
222.00 ₴
Lacrysil MS Polymer Universal Adhesive-Sealant — Hybrid Elastic Adhesive-Sealant, Silicone-Free
High-quality adhesive-sealant based on MS polymers (TM Lacrysil) — a universal hybrid 2-in-1 product: powerful adhesive + elastic sealant! Contains no silicone, isocyanates, solvents, or plasticizers — environmentally friendly, odorless, safe for health and the food industry.
Key Features:
Base: Hybrid MS Polymer (cures with atmospheric moisture)
Color: White or Transparent
Application temperature: +5…+40 °C
Service temperature: -40…+100 °C
Skin formation time: 15 ± 5 minutes
Curing rate: ~2 mm/day
Full curing: 24–48 hours (depends on layer thickness, humidity, temperature)
Elasticity: Up to 25% movement capacity (tension/compression)
Adhesion: Excellent to wet/dry, smooth/porous surfaces (metal, aluminum, glass, mirrors, wood, concrete, plaster, tiles, PVC, polycarbonate, stone, expanded polystyrene, mineral wool, etc.)
After curing: Elastic, strong, waterproof, frost-resistant bond; minimal shrinkage (~1%), resistant to aliphatic solvents, mineral oils, acids, alkalis, salts
Eco-friendliness: No toxic substances, low odor, safe for high-humidity areas
Shelf life: 12 months (+5…+25 °C)
Advantages:
Strong adhesion from the first seconds + elasticity for movement joints
Can be applied on damp surfaces, high viscosity — no sagging on verticals
Wide temperature range and chemical resistance
Does not dissolve plastics (except PP/PE), safe for mirrors/glass
Universal: bonds + seals, economical, odorless
Applications:
Bonding and sealing: metal, glass, mirrors, wood, concrete, tiles, plastics, stone, insulation materials; joints in windows/doors, insulated glazing units, roofing (tiles, slate, sheet metal), facades, sandwich panels; movement joints in construction, automotive, shipbuilding, aviation; furniture, ventilation, food industry, areas with vibration and moisture.
Application method: Clean surfaces (can be damp), apply from the tube in dots/strips/continuously, press together (fixation is not always necessary due to quick grab). Full curing — 1–2 days.
When you need a reliable, elastic, and eco-friendly adhesive-sealant — choose Lacrysil MS Polymer Universal. Professionals value it for its versatility and durability!
- Shelf life 12 months
- Operating temperature +5…+30 °C
- Foundation hybrid MS polymer
- Curing mechanism atmospheric moisture
- Dry matter content 98 ± 2 %
- Film formation time 15 ± 5 min
- Seam shrinkage/volume change ~ 1 %
- Storage temperature +5…+25 °C
- Application temperature +5…+40 °C
- Frost resistance during transport −15 °C
- Curing time 2 mm/day
Lacrysil Universal MS Polymer Adhesive-Sealant
Hybrid MS polymer adhesive-sealant (isocyanate-free, silicone-free, low odor). Forms a strong, elastic, water-resistant joint with no shrinkage.
Intended Use
Universal bonding and sealing: metal (including anodized aluminum), glass, mirrors, wood (including painted), concrete, plaster, gypsum, ceramic tiles, natural/artificial stone, PVC, polycarbonate, polyacrylates, expanded polystyrene, mineral wool, insulation materials.
Installation of facades, sandwich panels, ventilation systems, roofing (tiles, slate, metal), window/door frames, insulated glazing units.
Bonding and sealing joints, cracks, areas subject to vibration; repairs; bonding heavy elements (shelves, mirrors, panels).
Interior and exterior work, wet areas.
Surface Preparation
Surfaces must be clean, dry or slightly damp, free of dust, grease, oil, rust, and old sealant.
Degrease with a solvent (for metal/glass — acetone/alcohol).
Requires no special preparation for most materials (high adhesion even on damp surfaces).
Clean weak substrates.
Application
Application temperature: from +5 °C to +40 °C (optimal +15…+25 °C).
Humidity: no restrictions (can be used on damp surfaces).
Apply with a gun: in strips, dots, a "snake" pattern, or a continuous layer (thickness 3–10 mm depending on the task).
For bonding — apply in dots or strips; for sealing — fill the joint.
Bonding / Sealing
Attach the part within 10–20 minutes after application (high initial tack).
Press firmly for 10–30 seconds (for heavy items, secure with tape/supports for 24–48 hours).
The joint can be shaped/smoothed immediately (with a wet finger or tool).
Can be painted even while fresh (with water-based paints).
Drying / Curing Time (at +23 °C, humidity 50%)
Skin formation — 10–20 minutes
Initial strength — after 1–2 hours
Full curing — 2–3 mm per day (full strength after 24–72 hours depending on thickness and humidity)
Water resistance and elasticity — after full curing.
Coverage
A ≈ 280–310 ml tube yields approx. 10–15 linear meters of a 5×5 mm joint (depends on thickness). For bonding — 200–500 g/m².
Tool Cleaning
Fresh adhesive — with white spirit, gasoline, or a special cleaner for MS polymers.
Dried adhesive — mechanically (scraper, knife).
Important Warnings
Do not use on PE, PP, Teflon, bitumen, or some silicones (test adhesion on a sample).
Not for aquariums, permanent immersion in pressurized water, or food contact surfaces.
Work in a ventilated area (low odor, but still advisable).
Avoid contact with skin/eyes — rinse with water.
Store at +5…+25 °C, do not freeze.
Shelf life — 12–18 months.