AKRYLBET Concrete Floor Paint, Gray, 3 kg

AKRILBET by POLIFARB is a solvent-borne paint for concrete and mineral surfaces, industrial floors and car parks.

Quartz sand in the mix

What ordinary floor paints lack. The quartz filler does two jobs at once: it resists abrasion and it makes the surface non-slip. On a ramp or a warehouse aisle the second matters as much as the first: a wet painted floor without filler is an ice rink.

Built for traffic

The film takes impact and mechanical load, and is intended for surfaces under heavy use: production halls, warehouses, shops, garages, car parks and reinforced concrete structures.

Ninety minutes a coat

With 1.5 hours between coats, two coats fit into one working day. The floor can be put into service 72 hours after application.

Resists chemicals and salt

The film withstands detergents and disinfectants, water, salts and lubricants: a food warehouse, a garage taking in road salt all winter, or a shop floor washed daily.

Adhesion to mineral substrates

Strong adhesion to concrete, cement, fibre cement, brick and reinforced concrete.

Conditions

Thin with solvent naphtha. Two coats, undiluted, at 120–160 g/m² per coat on new surfaces and 180–250 g/m² on old ones, drying in up to 1.5 hours. Roller or brush, at air and substrate temperature of +5…+30 °C and relative humidity up to 60%. New concrete can be painted after 3–4 weeks, with substrate moisture no higher than 4%; screeds are sanded and dust removed. Prime with GRUNTFASAD or, on first-time painting, with the paint itself thinned 20% with solvent naphtha. White and grey, 3 and 12 kg, 18-month shelf life. The paint is flammable: ventilate and keep away from open flame.