EXTRAMAL GF-021 Alkyd anti-corrosion

Save to favorites

Add to compare

EXTRAMAL GF-021 Alkyd anti-corrosion, Gray, 0.9 kg

5.0 (1)

Alkyd anti-corrosion metal primer from the STANDARD line. A keying and anti-corrosion layer under the topcoat 80–120 g/m²

Specifications

Color:
Gray
Consumption:
80–120 g/m² per coat
Storage term:
12 months
Drying time:
up to 12 hours
Service life:
Over 4 years
Application area:
Indoor and outdoor use
Number of coats:
1–2
Packaging:
0.9 kg
Thinner:
White spirit, solvent or a 1:1 mix, max 10%
Application temperature:
+5…+30 °C

Choose a variant

6 available

Color: Red-brown Gray Gray
Packaging: 0.9 kg 2.8 kg 22 kg

Consumption calculator

Calculated at the average rate of 100 g/m² per coat (data sheet range 80–120 g/m²). Coats: 2.

Selected variant Gray · 0.9 kg

163.74 ₴

Description

EXTRAMAL GF-021 is an alkyd anti-corrosion primer used as a keying and anti-corrosion layer for spot or full priming of metal.

A basic primer for ordinary jobs

This is the answer for gates, railings, grilles, yard equipment and other metal. Coating systems built on it resist weathering in urban and industrial atmospheres.

What the film gives

Strong adhesion to the substrate, elasticity together with strength and hardness, resistance to salt solutions, mineral oils and temperature swings. Coating systems built on it work outdoors and indoors alike.

Saving on the topcoat

A primed surface absorbs evenly and has a uniform tone, so less finish enamel is used. Primer costs less than enamel, and that difference works in favour of the whole coating budget.

Twelve hours to dry

A coat takes up to 12 hours. That is the practical difference from DEKOMAL GF-021 and its six: priming and painting fall on two separate days. On a tight schedule the saving on primer may not repay the lost day.

A primer for galvanised steel

Galvanised steel (profiled sheet, roofs, gutters, flashings) is not painted directly: it is degreased and given 1 coat of EXTRAMAL GF-021. Once the primer is dry, it is topcoated with RUBBER FARBA rubber paint, PF-115 alkyd enamel or DEKOLUX. ZAKHYST 3 in 1 is not suitable for galvanised steel.

Packaging and storage

Before priming, clean the metal thoroughly of dirt, rust, mill scale and oils, sand and degrease it; prime immediately after removing rust. 1–2 coats, 80–120 g/m². If needed, thin with white spirit, solvent or a 1:1 mix, no more than 10% by volume. Air and substrate +5 to +30 °C, humidity no more than 60%. Clean tools with solvent. Packed in 0.9 kg, 2.8 kg and 22 kg. Colours: red-brown and grey. Declared protection over 4 years; shelf life 12 months: the shortest in the range, so buying ahead is a bad idea.

How much you need

100 g/m² in one coat.

  • 900 g covers about 9 m²;
  • 2.8 kg covers about 28 m²;
  • 22 kg covers about 220 m².

Application

Preparing the surface

  • remove loose rust, scale and flaking old coating;
  • degrease the surface with white spirit;
  • the surface must be dry: primer will not hold on damp metal.

Thinning

  • thin with white spirit, solvent or a 1:1 mix if needed;
  • stir thoroughly before use.

Application

  • apply by brush, roller or spray;
  • 1–2 coats;
  • drying: up to 12 hours, so the enamel goes on the next day.

Next

  • apply the topcoat once the primer has dried fully;
  • clean tools with solvent straight away;
  • store tightly closed away from flame.

FAQ: choosing a primer, drying and storage

  • How does it differ from DEKOMAL GF-021?
    It dries in 12 hours against 6, lasts over 4 years against over 5, and uses 80–120 against 60–100 g/m². Cheaper per tin, dearer per square metre.

  • Why only 12 months of shelf life?
    That is the manufacturer's figure. Primer that has stood longer should not be used.

  • Can any enamel go over it?
    Alkyd PF enamels, yes. That is the standard system. Check compatibility for nitro and other formulations.

  • How much for a 3×2 m gate?
    Both sides come to 12 m²; one coat needs about 1.2 kg.

  • Is a primer needed if the enamel is "3 in 1"?
    No. The rust converter and primer are already in it.

Video
Reviews (1)

Similar products

2 similar products

EXTRAMAL PF-115 Alkyd ename

EXTRAMAL PF-115 Alkyd ename

In stock

Color

Packaging

from

154.38 ₴

Choose variant