Acrylic adhesive for artificial grass “Multi-Green”

Save to favorites

Add to compare

Acrylic adhesive for artificial grass “Multi-Green”, Green, 1.5 kg

A ready-mixed adhesive for artificial grass and synthetic coverings. Holds turf on concrete and timber No slip on slopes 0.7–0.8 kg/m²

Specifications

Color:
Green
Consumption:
0.7 - 0.8 kg/m²
Storage term:
18 months
Drying time:
24 - 48 hours
Operating temperature:
-40°C ... +80°C
Packaging:
1.5 kg
Base:
copolymer-acrylate
Application temperature:
+10°C ... +35°C

Choose a variant

4 available

Color: Green Green
Packaging: 1.5 kg 3 kg 6 kg 15 kg
Description

MULTI-GREEN is a ready-to-use one-component acrylic adhesive for artificial grass, grass-type carpet and other synthetic coverings on woven and non-woven backings.

A narrow job, done properly

Artificial turf is awkward to bond: a dense non-porous backing, outdoor exposure and constant foot traffic. General-purpose adhesives either fail to grip the backing or go brittle within a season.

No slip on slopes

Thixotropic, so it works on banks, verges and vertical planting features without weighting the roll down.

A flexible joint

Outdoor coverings move daily with temperature and flex underfoot; a rigid joint lifts at the edges, a flexible one moves with it.

Substrates

Concrete, cement screed, brick and stone; boarded floors, plywood, hardboard, OSB and chipboard; other absorbent bases. Garden lawns, sports and play areas, terraces and interior features.

Conditions

Apply at +10 to +35 °C, service -40 to +80 °C, full cure 24–48 hours. Green, so seams stay invisible. 1.5, 3, 6 and 15 kg, 18-month shelf life, water clean-up.

How much you need

0.7–0.8 kg/m² spread solid: more than a vinyl adhesive, because the woven backing absorbs it.

  • 1.5 kg covers about 2 m²;
  • 3 kg covers about 4 m²: a balcony or small terrace;
  • 6 kg covers about 8 m²;
  • 15 kg covers about 20 m²: a play area or garden lawn.

Bonding only the perimeter and seams in 20–30 cm bands cuts consumption two or three times and keeps the covering liftable.

Application

Preparation

  • clean and dust off the base; the screed must be dry and crack-free;
  • lay the turf out and let it relax out of the roll;
  • trim the sheets to fit before spreading adhesive.

Application

  • stir and spread with a notched trowel, B3–B11 depending on pile and roughness;
  • for a liftable covering, band 20–30 cm at the perimeter and seams;
  • work in areas you can cover in time.

Laying

  • roll with a heavy roller or press with a board;
  • press seams separately: they open first;
  • 10–20 minutes of open time to adjust.

Afterwards

  • keep off for 24–48 hours;
  • wash tools and splashes with water;
  • store above freezing, 18 months.

Compatibility table

Material / Base Concrete, brick Gypsum, plasterboard Stone, granite, marble Wood, chipboard, fiberboard, MDF, plywood Nonwoven materials
Artificial grass carpet
Linoleum, parquet, laminate -
PVC coverings
Vinyl coverings
Carpet coverings
Wood, chipboard, fiberboard, MDF

FAQ: full bed or bands, consumption, outdoors

  • Must the turf be fully bonded?
    No. Perimeter and seam bands are enough on sheltered areas and keep the covering liftable. Full bonding is for slopes and heavy traffic.

  • How much for a 4×5 m area?
    About 15 kg fully bonded, about 6 kg on bands.

  • Outdoors?
    Yes, that is the main use: apply from +10 °C on a dry base.

  • When can it be walked on?
    After 24–48 hours.

  • Ordinary carpet?
    Use Ultra Lip indoors; this one is made for synthetic grass and woven backings.

Video
Reviews (0)

Similar products

5 similar products