Acrylic adhesive “Liquid Nails”

Save to favorites

Add to compare

Acrylic adhesive “Liquid Nails”, White, 0.2 kg

5.0 (1)

Acrylic liquid nails in two versions. White holds 1000 kg/m² Clear holds 800 kg/m² and leaves no visible trace

Specifications

Color:
White
Consumption:
0.25 - 1 kg/m²
Storage term:
18 months
Drying time:
24 - 48 hours
Operating temperature:
-40°C ... +80°C
Packaging:
0.2 kg
Base:
copolymer-acrylate
Application temperature:
+5°C ... +35°C

Choose a variant

4 available

Color: White White Transparent
Packaging: 0.15 kg 0.2 kg 0.28 kg 0.4 kg

Consumption calculator

Selected variant White · 0.2 kg

70.02 ₴

Description

Liquid Nails is a waterproof one-component acrylic dispersion adhesive for repair and assembly work indoors and out.

White or clear

Two versions of one product. White holds 1000 kg/m² in 0.2 and 0.4 kg tubes and suits joints that will be covered anyway. Clear holds 800 kg/m² in 0.15 and 0.28 kg tubes and is for joints that stay in sight: glass, mirrors, pale trim.

Thixotropy and cure

It does not sag on a vertical face. Full polymerisation takes 48 hours, which is when the joint reaches its rated load.

Instead of a drill

Skirting, thresholds, mouldings, PVC panels, polystyrene items, mineral wool, tile, stone and timber onto concrete, brick, OSB, plasterboard, metal and render.

Working conditions

Apply at +5 to +35 °C on a dry, degreased surface. In service -40 to +80 °C. Consumption 0.25–1 kg/m². Clean with water while fresh. Shelf life 18 months.

How much you need

Count tubes by running metres of bead. A Ø3 mm bead gives about 25 m from a 0.4 kg tube and about 12 m from a 0.2 kg tube.

  • 0.15 kg (clear): a mirror or glass shelf;
  • 0.2 kg (white): thresholds and a few mouldings;
  • 0.28 kg (clear): a visible perimeter joint;
  • 0.4 kg (white): skirting around a 4×5 m room.

Ø20 mm spots on a 150×150 mm grid work out at about 0.25 kg/m²; a full bed reaches 1 kg/m².

Application

Preparation

  • clean both faces of dust, grease and old coatings;
  • consolidate friable substrates with primer;
  • degrease smooth metal and plastic; prime metal.

Application

  • cut the nozzle and load the tube into a gun;
  • long pieces: a continuous Ø3 mm bead;
  • panels: Ø20 mm spots on a 150×150 mm grid;
  • insulation boards: perimeter bead plus inner spots.

Fixing

  • press home, or pull off and re-seat after 2–3 minutes for better grab;
  • support heavy items mechanically for a few hours;
  • full cure 48 hours.

Afterwards

  • wipe squeeze-out with a damp cloth at once;
  • cap the nozzle;
  • store above freezing.

Compatibility table

Material / Base Concrete, brick, gypsum, plasterboard Stone, granite, marble Mirror, glass Wood, chipboard, fiberboard, MDF, plywood Tile, ceramic, porcelain Primed metal Plastic, PVC Polystyrene
Concrete, brick, gypsum, plasterboard
Stone, granite, marble
Mirror, glass - - -
Wood, chipboard, MDF, fiberboard, plywood
Tile, ceramic, porcelain -
Primed metal
Plastic, PVC - - -
Polystyrene

FAQ: white or clear, load and time

  • White or clear?
    Clear where the joint shows; white where it is covered: white holds 1000 kg/m² against 800.

  • How does it differ from silicone sealant?
    It is an adhesive, not a sealant: it holds parts but is not for moving joints or watertight sealing.

  • On a painted wall?
    Only as well as the paint holds. Remove limewash and flaking paint.

  • Time before loading?
    48 hours for full cure.

  • Outdoors?
    Yes, down to -40 °C in service, but apply at +5 °C or warmer.

Video
Reviews (1)

Similar products

2 similar products