Acrylic adhesive “Tile, Mosaic, Stone”

Save to favorites

Add to compare

Acrylic adhesive “Tile, Mosaic, Stone”, Beige, 1.5 kg

A ready-mixed acrylic adhesive for tile, mosaic and stone. 2200 kg/m² Takes 15 % deformation and vibration Zero slip

Specifications

Color:
Beige
Consumption:
spot application - 0.3 - 0.4 kg/m²; with spatula - 0.8 - 1.2 kg/m²
Storage term:
18 months
Drying time:
24 - 48 hours
Operating temperature:
-40°C ... +90°C
Packaging:
1.5 kg
Base:
copolymer-acrylate
Application temperature:
+8°C ... +35°C

Choose a variant

4 available

Color: Beige Beige
Packaging: 1.5 kg 3 kg 8 kg 15 kg

Consumption calculator

Selected variant Beige · 1.5 kg

206.04 ₴

Description

Tile, mosaic and stone adhesive is a ready-mixed elastic acrylic: the strongest in the range at 2200 kg/m².

Elastic, not rigid

Cement tile adhesive is rigid and cracks when the substrate moves. This one takes 15 % deformation and damps vibration, which is why it suits timber-based substrates and heated floors.

Ready mixed

No pot life, no batching: open the pail, work, close it and carry on tomorrow.

Zero vertical slip

Tiles do not slide down the wall before the row sets: critical with mosaic sheets, which cannot be realigned once skinned.

What and onto what

Ceramic and faience tile, stone, mosaic; insulation boards, hardboard and acoustic panels. Onto concrete, cement render, gypsum and plasterboard, timber and wood-based boards, OSB, foam, stone and primed metal.

Conditions

Apply from +8 °C: higher than the rest of the range. Service -40 to +90 °C. 1.5, 3, 8 and 15 kg, 18-month shelf life, water clean-up. Not for permanent immersion.

How much you need

Spots 0.3–0.4 kg/m²; a full notched bed 0.8–1.2 kg/m².

  • 1.5 kg covers about 1.5 m²: a splashback or mosaic inset;
  • 3 kg covers about 3 m²;
  • 8 kg covers about 8 m²: a bathroom wall;
  • 15 kg covers about 15 m²: a whole bathroom.

Budget at 1 kg/m² for a safe margin: uneven substrates need a thicker bed.

Application

Preparation

  • a dry, sound, dust-free and flat substrate;
  • prime porous or friable surfaces;
  • room and substrate at +8 °C or above;
  • switch underfloor heating off a day before.

Application

  • stir and spread with a notched trowel;
  • 3–4 mm notch for mosaic, 6–8 mm for standard tile;
  • Ø20 mm spots are acceptable for single pieces and stone;
  • work in 1 m² areas so the adhesive does not skin.

Laying

  • press and tap home with a rubber mallet;
  • rake squeeze-out out of the joints at once;
  • grout after 24 hours, full load at 48.

Afterwards

  • wash tools with water;
  • seal the pail: the remainder keeps;
  • do not freeze; 18 months.

Compatibility table

Material / Base Compatible
Concrete, brick, gypsum, plasterboard
Stone, granite, marble
Wood, chipboard, fiberboard, MDF, plywood, OSB
Tile, ceramic, mosaic

FAQ: cement or acrylic, heated floors, consumption

  • Why not cement adhesive?
    Elasticity and convenience: 15 % deformation and vibration damping let it work on timber, OSB, plasterboard and heated floors where cement cracks, and there is nothing to mix.

  • Heated floors?
    Yes. Off a day before, on again after three days.

  • Bathrooms?
    Yes, walls and floors, but not pools or permanent immersion.

  • Why +8 °C?
    That is the rated minimum for this adhesive; below it the water-based joint under-cures.

  • How much for a 2×1.7 m bathroom?
    About 20 m², so roughly 20 kg.

Video
Reviews (0)

Similar products

5 similar products