Selected package
pcs
Leftover:
Save to favorites
Compare
Acrylic adhesive “Ultra Lip”
A floor-covering adhesive rated at 2000 kg/m². Vinyl, carpet, parquet and LVT Suitable for underfloor heating
Specifications
- Consumption:
- 0.2 - 0.25 kg/m²
- Storage term:
- 18 months
- Drying time:
- 24 - 48 hours
- Operating temperature:
- -40°C ... +100°C
- Base:
- copolymer-acrylate
- Application temperature:
- +5°C ... +35°C
Choose a variant
Scope
Material needed
Total
Cheaper package combination
pcs
Leftover:
Ultra Lip is a ready-to-use one-component acrylic adhesive for floor coverings.
Underfloor heating
The joint survives repeated heating and cooling without embrittling, and the -40 to +100 °C range covers any wet or electric circuit.
2000 kg/m²
Twice the base assembly adhesive. A floor takes point loads every day: furniture feet, chair castors, heels.
What it bonds
Domestic vinyl including unbacked, foam- and felt-backed, carpet and cork, parquet, LVT, polyester-backed rugs, chipboard, hardboard and plywood onto concrete, cement screed, timber, aerated concrete, chipboard, hardboard and OSB.
Indoors and out
The maker also allows exterior work: terraces and covered porches. Beige, so seams show less on light coverings than a white adhesive.
Conditions
Apply at +5 to +35 °C on a dry screed. 0.2–0.25 kg/m² spread solid, full cure 24–48 hours. 1.2, 3, 6 and 12 kg, 18-month shelf life, water clean-up.
How much you need
0.2–0.25 kg/m² spread solid with a notched trowel: the most economical floor adhesive in the range.
- 1.2 kg covers about 5 m²;
- 3 kg covers about 13 m²: a 3.5×3.5 m room;
- 6 kg covers about 26 m²;
- 12 kg covers about 53 m²: a whole flat.
Rough or porous screeds use more: prime them first.
Application
Preparation
- the screed must be dry, flat, crack-free and dust-free;
- prime weak or friable bases;
- unroll the covering indoors a day before laying;
- switch underfloor heating off a day before and leave it off for three days after.
Application
- stir and spread solid with a notched trowel;
- match the notch to the covering;
- work in areas you can cover in time.
Laying
- roll from the centre outwards with a heavy roller;
- press seams and perimeter especially;
- keep off the fresh floor.
Afterwards
- full load after 24–48 hours;
- wash tools and splashes with water;
- do not freeze; 18 months.
Compatibility table
| Material / Base | Concrete, brick | Gypsum, plasterboard | Stone, granite, marble | Wood, chipboard, fiberboard, MDF, plywood |
|---|---|---|---|---|
| Linoleum | - | |||
| Parquet | ||||
| PVC coverings | ||||
| Vinyl coverings | ||||
| Carpet coverings | ||||
| Wood, chipboard, fiberboard, MDF, plywood |
FAQ: underfloor heating, consumption and load
Underfloor heating?
Yes. Switch off a day before, back on no sooner than three days after, raising the temperature gradually.How much for a 4×5 m room?
20 m² needs about 4.5 kg: a 6 kg pail.Parquet?
Yes; check the guidance from the board manufacturer for wide solid boards.When can furniture go back?
After 24–48 hours.Terraces?
Yes, it is approved for exterior work and serves from -40 °C, provided the screed is waterproofed beneath.
No videos have been added for this product yet.
Customer reviews
No reviews for the selected filter yet.
Write a review
Similar products
4 similar products
