Selected package
pcs
Leftover:
Save to favorites
Compare
Rubber adhesive “Extra Strong”
A solvent-based rubber adhesive. 2500 kg/m² Works from -10 °C Waterproof Contact bonding grabs instantly
Specifications
- Consumption:
- 0.2 - 0.5 kg/m²
- Storage term:
- 18 months
- Drying time:
- 24 - 48 hours
- Operating temperature:
- -40°C ... +80°C
- Base:
- synthetic rubbers and resins
- Application temperature:
- -10°C ... +35°C
Choose a variant
Scope
Material needed
Total
Cheaper package combination
pcs
Leftover:
Extra Strong rubber adhesive is a multi-purpose solvent-borne synthetic construction adhesive.
The only rubber adhesive in the range
Every other construction adhesive we stock is a water-based acrylic or an MS Polymer. Choose Extra Strong when frost, water or two non-porous faces rule out acrylic: the solvent evaporates without a porous side, so it sets where a water-based adhesive would not dry. For indoor finishing on porous substrates an acrylic adhesive is usually enough.
Works in the cold
The only adhesive in the range applied from -10 °C. Water-based acrylics simply freeze and never reach strength.
2500 kg/m² and instant grab
Very high initial tack fixes the part at once, and the rated load suits heavy work: wall panels, exterior cladding, ceramic slabs, stone and gypsum parts.
Contact bonding
Coat both faces, let them flash off to touch-dry, then join. There is no second chance to move the part, so mark out first.
A watertight joint
Not merely water-resistant but watertight, and untroubled by two non-porous faces: metal to metal, glass to metal, plastic to concrete, the pairings where acrylics struggle.
Safety
Not for mirrors: the solvent eats into the silvering. Glue mirrors with a solvent-free MS Polymer adhesive.
Solvent-borne: ventilate and keep away from flame. Clean with acetone or petrol, not water. Colour depends on the pack: 0.36 kg is beige, 50 g and 0.28 kg are clear. Service -40 to +80 °C, 18-month shelf life.
How much you need
0.2–0.5 kg/m². Contact bonding coats both faces, so the real figure per square metre of joint doubles.
- 50 g: small repairs;
- 0.28 kg covers about 1 m² of contact-bonded joint;
- 0.36 kg covers about 1.2 m²: a wall panel or several ceramic slabs.
Use a notched trowel for area work and a gun for beads.
Application
Preparation
- clean and degrease both faces with acetone or petrol, then dry;
- ventilate and remove any source of flame or sparks;
- mark the position first: the part cannot be moved once joined.
Contact bonding
- coat both faces thinly and evenly;
- let them flash off until touch-dry but tacky;
- join and press firmly over the whole area;
- roll or tap home.
Bead application
- heavy parts: a Ø3 mm bead or spots over the area;
- press and support until strength develops;
- full cure 24–48 hours.
Afterwards
- clean tools with acetone or petrol: water does not work;
- seal the container, keep away from flame;
- 18-month shelf life.
Compatibility table
| Material / Base | Concrete, brick, gypsum, plasterboard | Stone, granite, marble | Glass | Wood, chipboard, fiberboard, MDF, plywood | Tile, ceramic, porcelain | Ferrous and galvanized metal, stainless steel | Rubber, PVC | Aluminum, copper and their alloys |
|---|---|---|---|---|---|---|---|---|
| Concrete, brick, gypsum, plasterboard | ||||||||
| Stone, granite, marble | ||||||||
| Glass | ||||||||
| Wood, chipboard, MDF, fiberboard, plywood | ||||||||
| Tile, ceramic, porcelain | ||||||||
| Ferrous and galvanized metal, stainless steel | ||||||||
| Rubber, PVC | ||||||||
| Aluminum, copper and their alloys | ||||||||
| Tile roofing, slate, tinplate |
FAQ: frost, contact bonding, clean-up
Really usable in winter?
Yes, from -10 °C: the main advantage over acrylics, which do not work below freezing at all.Clean-up?
Acetone or petrol. Water will not touch it.What is contact bonding?
Coat both faces, wait until touch-dry, then join. The grab is instant, so position accurately first time.Will it attack polystyrene?
Yes. The solvent dissolves it. Use an acrylic adhesive or adhesive foam for EPS and XPS.Indoors?
Only with active ventilation; it is solvent-borne and smells strongly until dry.
No videos have been added for this product yet.
Customer reviews
Максим
Приклеил таким клеем зеркало в ванне.
Write a review
Similar products
4 similar products
-
-
-
-
-10%
