Acrylic adhesive “Ultra Lip”

Save to favorites

Add to compare

Acrylic adhesive “Ultra Lip”, Beige, 3 kg

A floor-covering adhesive rated at 2000 kg/m². Vinyl, carpet, parquet and LVT Suitable for underfloor heating

Specifications

Color:
Beige
Consumption:
0.2 - 0.25 kg/m²
Storage term:
18 months
Drying time:
24 - 48 hours
Operating temperature:
-40°C ... +100°C
Packaging:
3 kg
Base:
copolymer-acrylate
Application temperature:
+5°C ... +35°C

Choose a variant

4 available

Color: Beige Beige
Packaging: 1.2 kg 3 kg 6 kg 12 kg

Consumption calculator

Selected variant Beige · 3 kg

441.00 ₴

Description

Ultra Lip is a ready-to-use one-component acrylic adhesive for floor coverings.

Underfloor heating

The joint survives repeated heating and cooling without embrittling, and the -40 to +100 °C range covers any wet or electric circuit.

2000 kg/m²

Twice the base assembly adhesive. A floor takes point loads every day: furniture feet, chair castors, heels.

What it bonds

Domestic vinyl including unbacked, foam- and felt-backed, carpet and cork, parquet, LVT, polyester-backed rugs, chipboard, hardboard and plywood onto concrete, cement screed, timber, aerated concrete, chipboard, hardboard and OSB.

Indoors and out

The maker also allows exterior work: terraces and covered porches. Beige, so seams show less on light coverings than a white adhesive.

Conditions

Apply at +5 to +35 °C on a dry screed. 0.2–0.25 kg/m² spread solid, full cure 24–48 hours. 1.2, 3, 6 and 12 kg, 18-month shelf life, water clean-up.

How much you need

0.2–0.25 kg/m² spread solid with a notched trowel: the most economical floor adhesive in the range.

  • 1.2 kg covers about 5 m²;
  • 3 kg covers about 13 m²: a 3.5×3.5 m room;
  • 6 kg covers about 26 m²;
  • 12 kg covers about 53 m²: a whole flat.

Rough or porous screeds use more: prime them first.

Application

Preparation

  • the screed must be dry, flat, crack-free and dust-free;
  • prime weak or friable bases;
  • unroll the covering indoors a day before laying;
  • switch underfloor heating off a day before and leave it off for three days after.

Application

  • stir and spread solid with a notched trowel;
  • match the notch to the covering;
  • work in areas you can cover in time.

Laying

  • roll from the centre outwards with a heavy roller;
  • press seams and perimeter especially;
  • keep off the fresh floor.

Afterwards

  • full load after 24–48 hours;
  • wash tools and splashes with water;
  • do not freeze; 18 months.

Compatibility table

Material / Base Concrete, brick Gypsum, plasterboard Stone, granite, marble Wood, chipboard, fiberboard, MDF, plywood
Linoleum -
Parquet
PVC coverings
Vinyl coverings
Carpet coverings
Wood, chipboard, fiberboard, MDF, plywood

FAQ: underfloor heating, consumption and load

  • Underfloor heating?
    Yes. Switch off a day before, back on no sooner than three days after, raising the temperature gradually.

  • How much for a 4×5 m room?
    20 m² needs about 4.5 kg: a 6 kg pail.

  • Parquet?
    Yes; check the guidance from the board manufacturer for wide solid boards.

  • When can furniture go back?
    After 24–48 hours.

  • Terraces?
    Yes, it is approved for exterior work and serves from -40 °C, provided the screed is waterproofed beneath.

Video
Reviews (0)

Similar products

4 similar products