Loading...
Adhesive for wallpaper - LUX ADHESIVE
Transparent after drying — invisible on glass fiber wallpaper and glass mat
Ultra-high adhesive power — for heavy and glass fiber wallpapers
Ability to adjust the panel during pasting
High moisture resistance — ideal for kitchens, bathrooms
Ready to use, economical coverage
370.02 - 1 186.02 ₴
Bought together
Frequently bought together
Lacrysil "LUX ADHESIVE" Adhesive for Glass Fiber Wallpaper — Professional Ready-to-Use Adhesive for Glass Fiber Wallpaper and Heavy Rolls
High-quality, ready-to-use acrylic adhesive "LUX ADHESIVE" (TM Lacrysil) — specially designed for glass fiber wallpaper and glass mat! Provides ultra-high bonding strength, the ability to adjust the panel, high moisture resistance, and a transparent seam after drying.
Key Features:
Base: Acrylic dispersion (water-based, modified, solvent-free)
Color: Milky white (in concentrate), transparent after drying
Application temperature: +5…+35 °C
Service temperature: -40…+80 °C
Full drying time: 24 hours
Coverage: 200–300 g/m² (depends on the surface and type of wallpaper)
Adhesion: Ultra-high to concrete, brick, plaster, drywall, glass mat, glass fiber wallpaper, heavy vinyl/textile wallpaper
After drying: Transparent, elastic, moisture-resistant seam; high strength, ability to adjust the panel, resistance to moisture and microflora
Eco-friendliness: Environmentally friendly, low odor
Shelf life: 18 months (at +5…+30 °C)
Advantages:
Transparent after drying — invisible on glass fiber wallpaper and glass mat
Ultra-high adhesive power — for heavy and glass fiber wallpapers
Ability to adjust the panel during pasting
High moisture resistance — ideal for kitchens, bathrooms
Ready to use, economical coverage
Applications:
Bonding glass fiber wallpaper (fiberglass wallpaper, glass mat), all types of heavy wallpaper (vinyl, textile, non-woven), glass mat for painting; surface preparation in residential and commercial premises (walls, ceilings). Suitable for interior work on porous and smooth substrates.
Application method: Stir the adhesive, apply evenly to the surface (wall or panel) with a brush/roller/spatula, apply the wallpaper, smooth out, adjust if necessary (open time — up to 10–15 min). Allow 24 hours for full drying. Work at +5…+35 °C, avoid drafts.
The professional choice for glass fiber wallpaper — Lacrysil "LUX ADHESIVE". Holds strong, transparent, moisture-resistant!
- Foundation Acrylic
- Application temperature +5…+35 °C
- Operating temperature -40…+80 °C
- Shelf life 18 months
- Drying time 24 hours
Lacrysil / Polifarb LUX Adhesive for Glass Fiber Wallpaper
Ready-to-use professional adhesive for heavy wallpaper. Transparent after drying, environmentally friendly, high adhesion, leaves no marks on the front side.
Intended Use
Bonding of:
Glass fiber wallpaper and glass mat;
All types of heavy wallpaper (vinyl, non-woven, polyester, textile, jute, tufted, embossed, structured);
Wallpaper for painting, paper wallpaper, heavy non-woven wallpaper.
Onto absorbent surfaces: concrete, foam concrete, plaster, putty, drywall, painted walls (in dry rooms).
Surface Preparation
Surfaces must be clean, dry, solid, free of dust, grease, peeling old paint/whitewash, and mold.
Remove or reinforce weak or powdery substrates with a primer (e.g., Lacrysil primer concentrate 1:10).
Prime highly absorbent surfaces for even absorption.
Lightly sand smooth/glossy surfaces.
Application
Temperature: from +5 °C to +35 °C (optimal +15…+25 °C).
Air humidity: no more than 65–70%.
Stir the adhesive until homogeneous (if in a bucket).
Apply evenly with a roller, brush, or spatula to the wall (for glass fiber/heavy wallpaper — apply to the wall; for non-woven — often applied to the panel).
Layer thickness: sufficient for full coverage (do not skimp).
Bonding
Apply the panel immediately after adhesive application (within the open time of the adhesive — 5–15 minutes).
Smooth out with a spatula or plastic squeegee from the center to the edges, expelling air.
Ability to adjust the position of the panel within 10–15 minutes after pasting.
Secure edges with masking tape if necessary (for heavy wallpaper).
Do not load (paint) earlier than after 24 hours.
Drying Time (at +20 °C, humidity 50–60%)
Initial grab — 10–30 minutes
Painting / loading possible — after 24 hours
Full drying — 24–48 hours
Coverage
Approximately 200–400 g/m² (depends on absorbency and type of wallpaper; for glass fiber wallpaper — closer to 300–400 g/m²). A 5 kg bucket covers ≈ 12–25 m².
Tool Cleaning
Fresh adhesive — warm water with soap.
Dried adhesive — mechanically or with special products.
Important Warnings
Not for constantly wet areas, underwater, or exterior work.
Not for PE, PP, Teflon, silicone.
Not for aquariums or food contact surfaces.
Avoid contact with skin/eyes — rinse with water.
Store between +5 °C and +30 °C, do not freeze.
Joint service temperature: -40…+80 °C.
Shelf life — 18 months.