Acrylic adhesive “La Crystal”

Save to favorites

Add to compare

Acrylic adhesive “La Crystal”, Transparent, 5 kg

A clear all-purpose assembly adhesive. The joint stays invisible on pale materials and at seams 1, 2.5 and 5 kg

Specifications

Color:
Transparent
Consumption:
0.25 - 0.5 kg/m²
Storage term:
18 months
Drying time:
24 - 48 hours
Operating temperature:
-40°C ... +80°C
Packaging:
5 kg
Base:
copolymer-acrylate
Application temperature:
+5°C ... +35°C

Choose a variant

3 available

Color: Transparent Transparent
Packaging: 1 kg 2.5 kg 5 kg

Consumption calculator

Selected variant Transparent · 5 kg

1 554.00 ₴

Description

LA CRYSTAL is a ready-to-use one-component acrylic assembly adhesive: clear, for joints that stay in sight.

Clear by the pail, not the tube

Clear assembly adhesives normally come in 150–280 g tubes for small jobs. This one is packed in 1, 2.5 and 5 kg pails for area work, where a white adhesive would inevitably show at a seam.

General purpose

Skirting, thresholds, panels, mouldings, trim, plasterboard, OSB, laminate, vinyl, ceramic tile, metal profiles, sills and shelving: onto concrete, brick, metal, timber, PVC, plasterboard, OSB, ceramics, glass and plastic.

Zero slip

Thixotropic, so parts stay put on walls and ceilings; heavy items still want an hour or two of support.

Solvent-free

Water-based, low odour, washes off while fresh, and safe on polystyrene.

Conditions and limits

Apply at +5 to +35 °C, service -40 to +80 °C, full cure 24–48 hours, 0.25–0.5 kg/m². 18-month shelf life. Not for permanent water contact. For two non-porous faces use an MS-polymer adhesive sealant instead.

How much you need

0.25–0.5 kg/m²: spots at the lower figure, a full bed at the upper.

  • 1 kg covers about 3 m² solid, or 8–10 m² spotted;
  • 2.5 kg covers about 7 m²;
  • 5 kg covers about 14 m²: a whole room clad.

For trim, count metres: 1 kg gives about 60 m of Ø3 mm bead.

Application

Preparation

  • clean off dust, grease, old paint and limewash;
  • consolidate weak substrates with a deep primer;
  • degrease smooth non-porous faces.

Application

  • light items: Ø20 mm spots on a 150×150 mm grid;
  • trim: a continuous Ø3 mm bead;
  • panels: a full 1 mm bed with a notched trowel;
  • heavy parts: spots over the whole area, corners included.

Fixing

  • press home and wipe squeeze-out at once;
  • support heavy vertical items for 1–2 hours;
  • full cure 24–48 hours.

Afterwards

  • wash tools with water;
  • seal the pail, do not freeze;
  • 18-month shelf life.

Compatibility table

Material / Base Concrete, brick, gypsum, plasterboard Stone, granite, marble Wood, chipboard, fiberboard, MDF, plywood Tile, ceramic, porcelain Primed metal Plastic, PVC Polystyrene
Concrete, brick, gypsum, plasterboard
Stone, granite, marble
Wood, chipboard, MDF, fiberboard, plywood
Tile, ceramic, porcelain -
Primed metal
Plastic, PVC - -
Polystyrene

FAQ: clear or white, consumption, substrates

  • Why clear rather than white?
    Because the joint shows: pale panels, glass, unmasked seams.

  • Versus Crazy Grip?
    The clear joint and the pack sizes; otherwise they are close products.

  • Glass to metal?
    It holds, but cures very slowly between two non-porous faces: use an MS-polymer product.

  • How much for a panelled room?
    A 3×2.5 m wall is 7.5 m² needs about 3 kg spread solid.

  • Bathrooms?
    Yes in a damp room, but not where water sits.

Video
Reviews (0)

Similar products

6 similar products