Mounting foams
Household polyurethane mounting foam
Household polyurethane foam with a straw: up to 70 l yield, 200–300 % secondary expansion. Gunned from -10 °C, no applicator needed.
Color:
Packaging:
In stock
Showing 1–8 of 8 products
Mounting foams
Professional polyurethane mounting foam
Professional gun foam: only 15–30 % secondary expansion, so the bead cannot bow a frame. Up to 70 l yield, gunned from -10 °C.
Color:
Packaging:
In stock
NEW
Mounting foams
MAX DUO 2-in-1 universal mounting foam (gun + straw)
One foam, two ways to apply: with a gun it yields up to 70 l with minimal post-expansion for windows and doors, with the straw up to 35 l and 400–700 % expansion for large voids. A...
Color:
Packaging:
In stock
Mounting foams
Fire-resistant professional polyurethane mounting foam
Fire-rated B1 gun foam, coloured red so the fire-stopped joint is identifiable. For joints that must hold a fire rating.
Color:
Packaging:
In stock
Mounting foams
Household polyurethane adhesive foam
Household adhesive foam for EPS: no gun required, applied from -10 °C. For insulating a single wall, plinth or loggia.
Color:
Packaging:
In stock
-15%
Mounting foams
Professional polyurethane adhesive foam
Orange, 800 ml
Adhesive foam for EPS and XPS: one can replaces a bag of adhesive mortar and covers 12–14 m² of board. Fixed in two hours.
Color:
Packaging:
In stock
Mounting foams
60 seconds professional adhesive foam
Fast-grab adhesive foam: tack-free in 3–5 minutes, set in 5–30. The next row of boards goes up without waiting.
Color:
Packaging:
In stock
Mounting foams
Mounting foam cleaner
A butyl-acetate cleaner for flushing foam guns and removing fresh foam. It will not dissolve cured foam: clean immediately.
Color:
Packaging:
In stock
mounting foams are used for filling gaps, cavities, and installation joints, installing window and door blocks, insulating joints, and fixing selected building materials. The section includes household and professional foams, fire-resistant formulas, adhesive foams for insulation boards and blocks, and a cleaner for fresh foam residue and tool care.
What mounting foams help with
filling cracks, gaps, holes, cavities, and installation spaces;
installing and sealing window and door blocks;
sealing joints, pipe penetrations, and areas where a cavity needs to be filled;
auxiliary thermal and acoustic insulation of joints when applied correctly;
fixing insulation boards, panels, foam blocks, and aerated concrete blocks with adhesive foams.
How to choose the foam type
Household foam is suitable for work with an adapter tube when an applicator gun is not needed.
Professional foam is used with an applicator gun when application control and repeatable work matter.
Fire-resistant foam is appropriate for assemblies that require this material type according to the project or site requirements.
Adhesive foam is used for installing insulation boards, panels, foam blocks, aerated concrete blocks, and some building structures.
Foam cleaner is used for fresh residue, can valves, applicator guns, and tools.
What to check before work
can type: household with a tube or professional for an applicator gun;
substrate material, joint width, cavity volume, and whether the part needs fixing;
application temperature, humidity, and surface preparation recommendations;
foam expansion after application and final curing time;
the need to clean fresh residue before curing and protect the formed joint from conditions specified by the manufacturer.